Product Description
1. Pictures of HC28 Roof Panel Roll Forming Machine
2.Profile Technical Specification and Technical Parameter
No
| ||
1
|
Suitable material
|
Colored steel plate, galvanized board , aluminum plate
|
2
|
Width of the raw material
|
1220mm
|
3
|
Thickness
|
0.3-0.6mm
|
4
|
Dimensions (L*W*H)
|
6920*1500*1510mm
|
5
|
Total power
|
Main motor power -4kw
Hydraulic station power-4kw
|
6
|
Rows of rollers
|
12 rows
|
7
|
Productivity
|
2m/min
|
8
|
Diameter of shaft
|
70mm
|
9
|
Voltage
|
380V 50Hz 3phases
|
3. The Chart of Process Flow
Manual Uncoiler—Roll Forming Machine—Computer Control System—Hydraulic Control System — Pressing—Form Cutter
Components
Specification of Components:
No
|
Components
|
Technical Specification & Remark
|
1
|
Manual Uncoiler
|
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand.
Loading capacity:5T
Inner diameter: 450-508mm
|
2
|
Main Roll Forming Machine
|
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
|
3
|
Hydraulic System
|
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Power:4kw
|
4
|
Computer Control Cabinet
|
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:EURA
|
5
|
Shearing Mechanism
|
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
|
6
|
Spare Parts
|
One box
|
http://chinarollingmachine.com/
Contact person： Anna Liu
Email: annaliu@czxindingli.com
Mobile&WhatsApp: +86 15532867977;
FAX: 86-317-8189190
没有评论:
发表评论